Hi,
The front led blinks yellow
I’m sure of Ethernet connection but Ethernet leds are off.
User manual says : over temperature
What to do
I tried 40 seconds reset no effect
Thanks in advance
Hi,
If the Ethernet cable is unplugged or cannot connect to a switch/router, there will be a blinking amber power LED. You may try a different Ethernet cable or use another LAN port to connect the cable.
Hi
The LAN Port and the cable are ok because they run very well with an other product.
It’s obviously the first thing I’ve checked .
I tried with an other port …same result.
At power on, the 2 leds (Ethernet) are on and switch off after few seconds
Bruno