I have 1 hub and 2 smp’s networked
I thought I would upgrade to the most recent firmware and get a USB hub so I could have 3 drives plugged in, it works great, i can access all 3 drives and on the network share for SMP i can see all three drives fine. What my issue is that on my Hub, i go to select source and then internal storage and there used to be “All local storage” which would show all 3 drives (just liked the networked SMP’s) but instead i only see
Internal Storage
Elements 1
Elements 2
Elements 3
(Elements are the hard drives) So i have to manual select each hard drive from here.
When i choose “Media Library” as the source i only can see 2 drives not the 3rd
Any suggestions or firmware to rollback to with usb hub supoort and “All local storage” option
jwhubuser wrote:
i go to select source and then internal storage and there used to be “All local storage”
All Local Storage isn’t under “Internal.” Internal is JUST the internal.
Sorry I meant that i press the “red” square then just “Local Storage” and the only options are
Internal Storage
Elements
Elements
Elements
representing the three drives
there is not “All local storage” option
ALL local storage (Internal disk plus all active USB disks) are combined into the media library.
Set your content source to My Media Library and all your local content will be there.
Thanks Tony but i tried that as well and in that case it will only show 2 of the usb drives and the internal (hub drive), it won’t show all three, i wasn’t sure if there was a way to “add” the third drive to the media library
When i get home I am gonna maybe try to use both native usb ports on the WDTV Hub and use the usb hub to hold only 2 drives instead of 3, hopefully that works
So you probably can unplug the “Missing” drive, take it to your PC, and delete the hidden .wd_tv folder at the root of the drive.
Then plug it back in and see if the library gets rebuilt to include that drive.
