Dear Sirs:
A few days ago I migrated from Windows 7 to Windows 10 by an update of it, so every program and file were like the previous system.
In addition to my desktop PC, I have a device WDTV Live model WDBAAN0000NBK-NESN, acquired in 2010. With that I have seen in different albums that I have on my PC, my video files, photos and music through thereof, via a modem, cable LAN to a remote TV in HD.
Everything seemed to work perfectly, but when trying to see those disks and files on my TV, I noted that the WDTV Live device is no longer connected to my PC or vice versa, I’m not very clear …
I went to the Microsoft forum, explaining what happened and was informed that WDTV Live did not support the Windows 10 operating system and asked me to do an upgrade WDTV Live team with the latest software from WDTV Live Media Player
I turned my device and tried an update to the Internet, after a few moments, the device reported that it was updated and whose version was: 1.06.43_V though I found other firmwares as 4.1.86 do not know if they are for my device and am afraid to make a definitive barrabasada.
I searched these forums, something to help me in this emergency and found nothing about it
Since I am no expert, I wonder if you can do an update in the case of haberla- for this new operating system, or is there any way to solve this problem, because in Microsoft I suggested to consult with you. It would be interested to know as fact resolvió.todo. This response, which proves that they, they have not solved yet.
I appreciate your response.
Oscar.-
PD: These paragraphs have been translated into English by Google Translate. Thanks for understand.
I am assuming you are starting the network window and you are unable to see WDTV as a device in the top row.
I have a WD TV Media Player, which is a later model, and it works with my Windows 10 PC.
If your WDTV previously worked with Windows 7 I am surprised it does not work with Windows 10.
Try accessing it directly in the network windows, type \WDTV in the bar at the top of the network window. If you do not know the name of your WDTV, go to your router and see what IP address are active, one will be your WDTV - use this address to try and access your device.
TYPE \WDTV (Double left slash), for some reason in my earlier post the double left slash was changed to a single one, not sure why.)
Hello, I have the same issue since only 2 days (it is ok with seven OS because I have another OS in a VMPlayer)… maybe a issue with SMB1 ? Nmap indicates that the ports are opened 
Starting Nmap 7.12 ( https://nmap.org ) at 2016-09-19 22:01 Paris, Madrid (heure d?été)
Nmap scan report for PARTAGESALON (192.168.1.3)
mass_dns: warning: Unable to determine any DNS servers. Reverse DNS is disabled. Try using --system-dns or specify valid servers with --dns-servers
Host is up (0.0070s latency).
Not shown: 94 closed ports
PORT STATE SERVICE
80/tcp open http
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
8008/tcp open http
8009/tcp open ajp13
nb: it is a WD TV Live Hub
Hello, ok the issue was with this update :
3185879 MS16-114 : Mise à jour de sécurité pour serveur Windows SMBv1 datée du 13 septembre 2016
After uninstall it and block the Windows update service : all seems to be ok !!!
Looks like a network issue - Unable to determine any DNS servers - try setting static ip addresses.
Would you be so kind as to send an image to know where to write the syntax that suggest? I’m no expert and have no idea where in the network window appears that indicates you. - Thank you
I think the key message is this:
“mass_dns: warning: Unable to determine any DNS servers. Reverse DNS is disabled. Try using --system-dns or specify valid servers with --dns-servers”
Before setting a static address, if you have a router (if you are getting internet from outside you may have a router) you should be able to login to it. For example, a netscape cable modem router’s address to login would be “http://192.168.0.1/”, you enter this in the browser, at the top. You will them be prompted with a login and password. You will need to check your manual on how to login. Once you login you should be able to see the devices (see your manual for where) if you do not you can try setting static addresses. If you do the problem is something else.
